How To Set Alarm On Sharp Spc844

                          SHARP Digital Alert Clock SPC276 User Manual

Cheers for your purchase of this quality clock. The utmost care has gone into the design and industry of your clock. Delight read these instructions and store them in a safe place for future reference.

Features

PM indicator
Warning indicator
Fourth dimension push
SOUND push button for sleep
BLUETOOTH button
Alert button.
SNOOZE/ DIMMER/ Sleep Fourth dimension/ Book (Rotary Dial)
SLEEP mode LED
BLUETOOTH LED
DC SV jack
Battery compartment

Power Supply

Insert the AC adapter into a 120V Ac – 60Hz mains outlet and the other stop of the cord into the DC SV jack on the back of the unit.

Setting the Time

Press and concord the TIME button for ii seconds to activate time setting, the hour digit volition flash. Use the Dial to rotate to the correct hour. The PM indicator volition appear when the hour is advanced into the PM fourth dimension.
Later on the hour is set up, press the Fourth dimension button again, the minute digits will wink. Utilise the Punch to rotate to the correct infinitesimal.
Press the TIME button to save and get out the fourth dimension setting or automatically save and exit later 20 seconds without whatsoever action.

Setting the Alarm

Press and hold the ALARM button for 2 seconds to actuate alarm setting, the hour digit will wink. Utilise the DIAL to rotate to the correct 60 minutes. The PM indicator will appear when the hour is advanced into the PM time.
After the hour is set, press the Alarm button again, the minute digits will wink. Utilize the DIAL to rotate to the right infinitesimal.
Later the minute is set, press the ALARM button once more, the brandish volition show 10 (default alarm volume is x, max 16) utilize the Punch to arrange the volume. Equally you rotate the DIAL the volume of the beep volition correspond to the number on the display.
Press the Warning push button to save and exit the alert setting.

Using the Alarm

Press the Warning button, the Alarm indicator will light on the display and will sound at the preset time.
Press the Alert button again, the Alarm indicator volition no longer be visible and the alarm will remain OFF.

Snooze Part (rotary dial button)

When the wake-upward warning is sounding press SNOOZE/DIMMER dial to actuate the SNOOZE, this will cause the alarm to pause and the alert will sound once again in nine minutes. This will happen each time when the SNOOZE/DIMMER dial is pressed.

Dimmer Office (rotary dial button)

Press the SNOOZE/DIMMER DIAL to use the display DIMMER. There are 3 levels of display brightness: Loftier/ Medium / Low (High is the default setting)

Bluetooth Role

Press the BLUETOOTH button to enter BLUETOOTH mode. The PAIRING indicator will wink blueish quickly. Using the native controls on your Bluetooth device (due east.thousand. smartphone), select "Precipitous" in your Bluetooth settings to pair.
When successfully paired and connected, the PAIRING Indicator will display a solid blue lite and a chime will sound from the unit of measurement.
After initial pairing, the unit will stay paired unless unpaired manually by the user or canceled due to a reset of the Bluetooth device.
Use the native controls on the connected Bluetooth device to select a track.
To play or skip the selected rails, use the native controls on the connected Bluetooth device.
Audio played through the connected Bluetooth device will now be heard through the speakers.
To adjust the volume, rotate the DIAL on the height of the unit.
To turn off BLUETOOTH mode, press and hold the BLUETOOTH button for ii seconds.

Playing Sleep Sounds

To play soothing Sleep SOUNDS printing the SOUND push.
Press the SOUND button again to cycle through the other sounds. (White Racket/ Pink Noise/ Chocolate-brown Noise/ Rain/ Thunder/ Ocean)
To adjust the volume, rotate the Punch on the top of the unit.
To plough off SLEEP SOUNDS, press and agree the Sound button for 2 seconds.

Volume Control (rotary punch button)

When playing a Sleep SOUND or using BLUETOOTH, rotate the Dial to increase or decrease the volume. The brandish will prove the electric current volume level (book level 0-sixteen).

Slumber Timer Part (rotary dial push)

When playing a SLEEP Audio or using BLUETOOTH, press and concord the Punch and rotate to set up the SLEEP timer for 90 I lx I xxx minutes. Release the dial when your desired Slumber time is shown and press the dial over again to confirm. The Sleep Sound or BLUETOOTH volition automatically turn OFF to the prepare time.
To view the remaining SLEEP time press the Dial and the display volition show the remaining sleep time.
Note: The dimmer office will not operate when the sleep timer is dive.

Bombardment Backup

Remove the BATTERY DOOR and insert two new "AAA" batteries (not included) in the direction of the polarity symbols.
Delight make sure the batteries are new and inserted correctly.
The battery will agree the Alarm and TIME settings if the power is interrupted.
In that location will be no brandish under battery power and the Alarm will sound at the correct fourth dimension. If there is no battery and the power is interrupted, the display will flash 12:00 and the Alarm/ Time volition demand to be reset.

Care of Your Clock

Replace the back up battery annually, or store the clock without a battery. When not in utilise. A soft cloth or a newspaper towel may exist used to clean your clock. Do not utilize any corrosive cleanser or chemical solutions on the clock. Keep the clock make clean and dry to avert any problems.

Bombardment Precautions

Only batteries of the aforementioned or equivalent blazon every bit recommended are to be used.
Batteries are to be inserted with the correct polarity.
The supply terminals are non to be curt-circuited.
Do not dispose of batteries in fire. Batteries may explode or leak.

FCC Information

§ 15.105 Information to the user.
NOTE: This equipment has been tested and institute to comply with the limits for a Course B digital device, pursuant to Office 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and tin can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Still, at that place is no guarantee that interference will not occur in a particular installation. If this equipment does crusade harmful interference to radio or television reception, which tin can be determined past turning the equipment off and on, the user is encouraged to try to correct the interference past one or more of the following measures:

Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dissimilar from that to which the receiver is connected.
Consult the dealer or an experienced radio/Boob tube technician for aid.

This equipment complies with FCC radiations exposure limits gear up forth for an uncontrolled surround.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

DIGITAL ALARM CLOCK

WARNING: TO REDUCE THE RISK OF Fire OR
ELECTRIC SHOCK, DO NOT Expose THIS
Apparatus TO RAIN OR MOISTURE.

Caution: TO PREVENT ELECTRIC Daze DO Non USE THIS (POLARIZED) PLUG WITH AN EXTENSION String, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES Tin can BE FULLY INSERTED TO Forestall BLADE EXPOSURE.

Delight read this before operating your unit.
The Bluetooth word and logos are registered trademarks owned by Bluetooth SIG, Inc.

Important Prophylactic Instructions

Read these instructions -All the condom and operating instructions should exist read before this product is operated.
Keep these instructions -The safe and operating instructions should be retained for hereafter reference.
Listen all warnings -All warnings on the appliance and in the operating instructions should be adhered to.
Follow all instructions – All operating and utilise instructions should be followed.
Do non use this apparatus virtually water- The appliance should non exist used near water or moisture – for example, in a wet basement or near a pond puddle, and the like.
Clean only with dry cloth.
Do not block any ventilation openings, Install in accordance with the manufacture's instructions.
Do not install most whatever heat sources such every bit radiators, heat registers, stoves, or other apparatus ( including amplifiers) that produce oestrus.
Practise non defeat the safety purpose of the polarized or grounding -blazon plug. A polarized plug has two blades with 1 wider than the other. A grounding type plug has two blades and a third grounding prong. The wide bract or the third prong are provided for your safe. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from beingness walked on or pinched particularly at the plugs, convenience receptacles, and at the signal where they exit from the appliance.
Only use attachments/accessories specified past the manufacturer.
Employ only with the cart, stand, tripod, bracket, or table specified past the manufacturer, or sold with the appliance. When a cart or rack is used, use caution when moving the cart/appliance combination to avoid injury from tip – over.
Unplug the apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified personnel. Servicing is required when the appliance has been damaged in whatever way, such as power supply cord or plug is damaged, liquid has been spilled or objects accept fallen into the apparatus has been exposed to rain or moisture, does non operate unremarkably, or has been dropped.
Please go on the unit in a skilful ventilation environment.
CAUTION: These servicing instructions are for use by qualified service personnel just. To reduce the risk of electric shock, practise not perform whatever servicing other than that contained in the operating instructions unless you lot are qualified to do so.

WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable. This equipment is a Class II or double insulated electric appliance. Information technology has been designed in such a style that it does not require a safety connexion to electric earth. Exercise non install this equipment in a confined or building-in space such equally a volume case or similar unit, and remain a well ventilation weather condition. The ventilation should non be impeded by covering the ventilation openings with items such as newspaper, tabular array-cloths, curtains etc.

Warning: All above markings were located on the external enclosure of the apparatus, except for label of Date Code was pasted within the bombardment compartment. The apparatus shall non be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall non be placed on apparatus.

Caution: Changes or modifications non expressly approved past the political party responsible for compliance could void the user'due south authority to operate the equipment.

WARNING: The battery shall not be exposed to excessive oestrus such as sunshine, burn or the similar.

If customer service is needed, please email cluster – [email protected]
or call cost free at one-800-221-0131 and ask for Customer Service.
Monday-Friday nine:00AM – 4:00 PM EST

One Yr Limited Warranty

Yard.Z. Berger & Company warrants the original consumer purchaser of this product that it shall exist free of defects in materials and workmanship for i twelvemonth from the buy date of this product. Defects caused by tampering, improper use, unauthorized modifications or repairs, immersion in water or corruption are not covered by this warranty. If a defect covered by this warranty occurs during the warranty period, wrap your clock carefully and send information technology to the post-obit address:

M.Z. Berger & Co., Inc.
353 Lexington Ave – 14th Fl.
New York, NY 10016

You must include a poof of Buy, either the original receipt or a photocopy and a bank check or money order for USD $6.00 to cover the cost of handling. Also include your return accost inside the package. Yard.Z. Berger will repair or replace the clock and return it to you. M.Z. Berger volition not be liable for whatever loss or damage, including incidental or consequential amercement of any kind; from whatsoever breach of warranty either expressed or unsaid relating to the production. Since some states do not allow the exclusion or limitation of incidental or consequential amercement, this limitation may not apply to yous.

Printed in China Model : SPC276

Documents / Resources

Source: https://manuals.plus/sharp/digital-alarm-clock-spc276-manual